What Is a Packing Group?
When you ship chemicals, batteries, paints, adhesives, or other regulated cargo by sea, the documents usually show a line called Packing Group, shortened to PG. Under the IMDG Code and the UN Model Regulations, the Packing Group indicates how dangerous a substance is, and therefore how strong its transport packaging must be.
Do not confuse PG with GP (General Purpose, the standard dry container). PG describes the hazard level of the cargo; GP describes the box. They are not the same thing.
For overseas buyers sourcing from Chinese factories, the PG decides whether the goods can be consolidated in an LCL container, what packaging certificate is required, which carriers will accept the shipment, and how the cargo must be stowed and isolated on board.
The Three Packing Groups
Dangerous goods that carry a packing group are divided into three levels.
Packing Group I — High Danger
PG I covers substances presenting high danger. These require the strongest protective packaging and the strictest stowage, segregation and carrier review. In practice, PG I cargo is often difficult to consolidate in LCL, and some carriers or terminals accept it only under specific conditions.
Packing Group II — Medium Danger
PG II covers substances presenting medium danger. It is one of the most common groups in chemical and industrial shipments from China. It still needs compliant certified packaging and careful documentation, but PG II cargo can usually move through standard FCL or approved LCL channels once the carrier reviews the file.
Packing Group III — Lower Danger
PG III covers substances presenting lower danger among regulated goods. Packaging requirements are relatively less strict, but the cargo is still a dangerous good and must be declared, packaged and labelled according to the rules. A lower packing group does not mean the shipment can be treated as general cargo.
How the Packing Group Is Determined
The packing group is assigned by the substance’s hazard criteria, not chosen by the factory or the forwarder. For flammable liquids (Class 3), it is set mainly by the closed-cup flash point and the initial boiling point:
- PG I: initial boiling point at or below 35 °C, regardless of flash point.
- PG II: initial boiling point above 35 °C, with flash point below 23 °C.
- PG III: flash point between 23 °C and 60 °C, with initial boiling point above 35 °C.
For other classes, the group is determined by criteria such as toxicity, corrosivity, reactivity, and official test results. Note that the same UN number can appear under different packing groups; the UN number alone does not fully identify the hazard. The complete identity is made up of the UN number, proper shipping name, class, subsidiary hazard, and packing group.
Not every dangerous good carries a packing group. Explosives, gases, radioactive material, and some self-reactive or infectious substances follow their own specific rules and do not use the PG I/II/III system.
What the Packing Group Affects in Practice
The PG influences several decisions along the shipping chain:
- Packaging strength: the packaging must meet the performance level matching the assigned group and carry the required UN marking.
- Consolidation (LCL): higher-danger cargo has stricter segregation limits; compatible classes and groups must be checked before consolidation.
- Carrier acceptance: shipping lines review the UN number, class, PG and documents before confirming DG space.
- Stowage and segregation: the group and subsidiary hazards determine how the container must be stowed on the vessel.
- Documentation and declaration: the PG must be stated correctly on the DG declaration, packing list, and booking file.
PG from the Perspective of a Chinese Factory and the Port of Shanghai
Most dangerous goods exported from eastern China are trucked from factories in the Yangtze River Delta — Suzhou, Kunshan, Jiaxing, Ningbo and the surrounding industrial belt — and consolidated or loaded through the Port of Shanghai, one of the main gateway ports for chemical and hazardous cargo in China.
The most common factory-side issues we see are:
- The packaging was chosen for cost or convenience, but does not match the performance level required by the assigned packing group.
- The MSDS or classification report lists a different class or PG than the actual substance, which causes the booking to be rejected or delayed.
- The packing certificate (the export dangerous goods packaging performance inspection and use appraisal issued under Chinese customs procedures) does not match the cargo, packaging type, or UN number declared to the carrier.
- Labels, marks and UN markings on the outer packages are incomplete or incorrect.
Before a DG container can be delivered to a Shanghai terminal, the file normally needs the MSDS in Chinese and English, the packing certificate, the transport condition / classification report, the DG declaration, and — for lithium batteries — the UN38.3 test summary. The container must be packed and checked by a qualified packing inspector, and the relevant maritime and customs declarations are submitted through the single-window and EDI systems. High-risk cargo may require additional review and terminal approval.
This is why early document review matters: a mismatch between the PG, the packaging, and the certificate is far cheaper to fix at the factory stage than after the cargo has already moved toward the port.
Why This Matters to Overseas Buyers
If your company sources chemicals, raw materials, battery products, coatings, or other regulated goods from China, the packing group directly affects your lead time, freight cost, and whether the shipment can be consolidated or must move as a full container. A buyer who only checks the product price may overlook that a PG I or non-compatible consolidation situation means longer booking lead time, fewer carrier options, or an FCL-only arrangement.
A forwarder who can read the MSDS, confirm the UN number and packing group, check the packaging certificate against the rules, and match the cargo to the right carrier and routing helps avoid rejections, rework, and delays at the port.
How I Help with Dangerous Goods from Shanghai and Kunshan
I work as a freight forwarder based in Kunshan, next to the Port of Shanghai, supporting shipments from factories in the Yangtze River Delta to destinations worldwide. My background is in cross-border e-commerce operations, which gives me a buyer-side understanding of what importers and online sellers need: clear documentation, realistic lead times, and cargo that moves without surprises.
My scope covers general cargo FCL and LCL, as well as dangerous goods booked through approved carriers and DG warehouses. On each enquiry I review the UN number, class and packing group, the MSDS and packing documents, the volume and destination, then propose the most suitable routing — a direct liner service, a feeder or transshipment option, or an FCL arrangement for higher-risk or non-consolidatable cargo. I coordinate booking, warehouse consolidation, terminal delivery, and the required DG declarations, and keep the buyer informed at each stage.
This service is not limited to Korean or Asian buyers. European, North American, or any overseas company sourcing regulated goods from Chinese factories can send me the product details and destination, and I will confirm whether the cargo is bookable and outline the required documents and routing.
Contact
For a quotation or document check on dangerous goods or general cargo from Shanghai / Kunshan, email me at ixrunning@outlook.com. Please include the product name, UN number and packing group if known, volume, destination port, and target shipment date.
Leave a Reply